16 SEER: 24000 BTU Inverter Mini Split - Heat Pump:  Enjoy full season comfort during the summer or winter with this 24,000 BTU Inverter Mini Split with 27,000 BTU Heat Pump. With a 16 SEER rating coupled with Advanced DC Inverter technology provides the benefits of low operation temperatures, rapid cooling / heating as well as maximum energy efficient operation. Comes fully charged with environmentally friendly R410A and includes complete installation kit.

Home > Mini Splits > 2 Ton >

Inverter 16 SEER Ductless Split

Air Conditioners - Split AC's, Portable AC's, Air Cooler Source
Mini Split Air Conditioners
Search BY BTU Capacity:
Inverter Systems
Quint-Zone (5)
Energy Star
Temperature Control: Portable A/C's, Window A/C's, Air Coolers, Ductless Splits,
Portable AC's >
Mini Wall Splits >
Ceiling Cassettes >
Suspended Ceiling >
Central AC's >
Window AC's >
Air Coolers >
Space Heaters >
Air Purification: IONIZERS, HEPA Filters, UV-TION
Ionizers >
UV/Tion >
Supplies >
Humidity Control: Humidifiers, Dehumidifiers
Humidifiers >
Dehumidifiers >
24000 BTU inverter Split
Indoor Unit Remote Control Outdoor Unit Installation Kit
 System Includes:
  • 24,000 BTU Cooling - 24,500 BTU Heat Pump
  • Digital Multi-function LCD Remote Control
  • Installation Kits (connection wire, piping etc.)
  • Product & Installation Manuals

    2 TON Inverter Mini Split AC - Heat Pump

    Price: $1584.45   Free Shipping  

    Backordered ETA: 07-14-2010
    Features back to the top
    Mini Split
    Top Line Features:
  • Maximum Efficiency: 16 SEER DC Inverter Technology
  • Pre-Charged with Eco-friendly R-410a Refrigerant
  • 24,000 - 29,000 BTU's of Turbo Cooling and Heating
  • Anti-Corrosive treatment in equipment components
  • Low Operation Temperatures
  • Better Winter Heating Performance Benefits
  • Good Sleep Cooling Operation
  • Signal Reception Indicator - Vertical Auto Swing
  • Auto & 3-Speed Fan Control with 24 Hour Timer
  • Remote, Installation Kit with 25' of piping Included
  • Mini Split Features
    dc inverter

    DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field.  They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current.  DC Inverter AC's bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power.  Therefore, unlike conventional split Air Conditioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.

    Conventional compressors turn on and off to maintain the room temperature at desired level.  This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off.  Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature.  The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained.

    Specifications back to the top
    System Specifications:
    Cooling Capacity: 24,000 BTU
    Cooling Inverter Capacity: 24,000 - 28,000 BTU
    Heat Pump Capacity: 24,500 BTU
    Heating Inverter Capacity: 24,500 - 29,000 BTU
    SEER: (Energy Efficiency) 16.0
    HSPF: 10.0
    EER Cooling: 10.5
    Timer Settings: 1-24 Hours
    Airflow: (Low - Med - Hi) 518 - 588 - 677 cfm
    Moisture Removal: (Pints / Day) 79.2
    Inside Noise Output: 44 - 47 - 50  dB(A)
    Outside Noise Output: 57 dB(A)
    Indoor Fan Speeds: 1080 - 1180 - 1280  RPM
    Zones: (Air Handlers) SINGLE
    Compressor Brand: Sanyo
    Compressor Type: INVERTER - DC
    Refrigerant: R-410A
    Indoor (air handler) Dimensions: 49" W x 9" D x 13.3" H
    Indoor (air handler) Weight: 44 lbs.
    Outdoor (condenser) Dimensions: 35.2" W x 17" D x 34.5" H
    Outdoor (condenser) Weight: 155 lbs.
    Electrical Info:
    Power Supply (VAC): 230 / 208 - 60Hz
    Consupmt: (rated / max) - Cooling 2531 / 2800 Watts 
    Consupmt: (rated / max) - Heating 2504 / 2722 Watts 
    Current: (rated / max) - Cooling 11.1 / 12.5 Amps 
    Current: (rated / max) - Heating 10.2 / 12.2 Amps 
    MCA: 17 Amps 
    HVAC breaker size: 25 Amps
    Piping - Install Kit Info:
    Ref. Connection Type Flare / Nut  (IP)
    Ref. Pipe Size (liquid - gas): 3/8" -  5/8"
    Service Port Connection: 5/16"
    Max Pipe Length: 100 Feet
    Max Elevation (above): 30 Feet
    Max Elevation (below): 45 Feet
    Load Capacity: (20'/40'/40' HQ) 58 / 108 / 116
    Click to View Full Spec Sheet >
    16 SEER ETL LISTED SANYO Compressor ARI Certified R410A refrigerant
    Install Kit back to the top
     Install Kit Contents:
  • Flared Insulated Copper Tubing
  • Pipe Insulation
  • Drain Pipe (outdoor)
  • Wall Cross piping
  • Defrost Wire
  • Putty to seal piping / holes
  •   Includes Install Kit
  • Remote Control w/ Wall Bracket & Batteries
  • Wire Harness Between Indoor & Outdoor
  • Wire Harness Outside Unit to Circuit Breaker

  •   Install Kit
    Remote Controls back to the top
    Remote Control Features
    Installation Overview back to the top
    BASIC OVERVIEW:  The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall.  A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables.  The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation.  Click to Download Installation Manual. *Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split*  See Installation Tip.  A certified HVAC technician must conduct / complete the installation to be eligible for the warranty.  (See warranty details below > ) Installation Kit
    Installation Diagram
    Living Room Ductless Split Setup   How will look After Installation
    Remote Controls back to the top
    *5 Year Compressor - 1 Year on all other Parts*  Registration card will be sent with unit, this card should be completed by an HVAC technician (installer).  Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.  Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge.   The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed.  Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty).  If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost.  Damaged / Defective product will be picked up and brand new exchange will be shipped out.  Download Manual - Warranty Polices >
    Available Accessories back to the top

    These Mini Split systems usually ship via SAIA Motor Freight Lines (on truck) or some other freight service. These units ship out of O'Fallon, Missouri and are in transit within 2 business days from payment receipt.  All system components are palletized together.  Depending on where you are geographically located, transit time is usually between 3 and 6 business days.  Please provide a contact phone# upon checkout where recipient of order can be reached.  SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR delivery.  Only ships to the lower 48 Contiguous United States.

      SAIA Freight Lines
     Mini Split Air Conditioner
    Call Thermospace at 407-965-2133
    View the Mini Split FAQ Page >
    View the Installation - Setup Diagram >
    View the Mini Split Overview Page >
    View the Mini Split Installation Tip >
    View All Ductless Mini Split Systems >
    View Only Inverter DC Ductless Splits >
    View Energy Star Energy Star Qualified Mini Splits >
    View Ceiling Mounted Ductless Systems >
    9000 BTU | 12000 BTU | 18000 BTU | 24000 BTU | 30000 BTU | 36000 BTU | 48000 BTU | 60000 BTU
    Single Zone line Dual Zone line Tri Zone line Quad Zone   Quint Zone

    Verisigned Paypal accepted

    Home - Contact - About - Privacy Policy - FAQ - Site Map


    Copyright © 2003-2017 Thermospace Inc.


    128 Bit
    Number of Cart Items:  0 | Total:  $0.00
    View Cart   Checkout