|
|
|
Cooling Capacity:
Room Size:
Thermostat Range:
Dimensions:
Weight:
|
|
9,000 BTU
250 Square Feet.
62° F - 90° F.
30" H x 16" W x 16" D
69 lbs. |
|
|
|
|
 |
| Stay cool and breathe fresher air with this powerful, yet efficient, portable air conditioner. The WA-9020E boasts a 9,000 BTU capacity and will keep you comfortable in rooms up to 250 square feet large. In addition to its cooling capabilities, this all-in-one unit cleans, dehumidifies, and improves the circulation of the air you breathe. - Includes All Installation Accessories |
|
|
|
|
|
 |
| 1 Year Manufacturer Warranty On Parts.
6 Year Manufacturer Warranty On Compressor.
Choice Of Programmable Timer Or Continuous Operation.
Evaporative Technology: Moisture Expells Through Exhaust!
Activated Carbon Filter Helps In Removing Odors.
Uses LCDI (Leakage-Current Detection & Interruption) plug.
Easy Grip Handle and Large Casters For Easy Mobility.
Cools, Dehumidifies, Improves Circulation & Cleans Air. |
|
|
|
|
|
|
 |
| Power Supply: |
120 VAC |
| Freqency: |
60hz |
| Energy Efficiency
(EER): |
10.31 |
| Power Consumption: |
873 Watts |
| Amperage: |
8.15 Amps |
|
|
|
|
 |
| Exhaust pipe length: |
5 feet |
| Exhaust pipe diameter: |
5 inches |
| Window Kit Material: |
Foam |
| Window Kit Length: |
Max: 48 in. |
|
|
|
|
|
 |
| Timer: |
1~12 hours |
| Water Tank Capacity: |
3.2 Pints. |
| Moisture Removal: |
50 Pints / Day |
| Air Volume: |
370 m3/h |
| Cooling Operating
Temp: |
62° F - 110° F |
| Compressor Type: |
Rotary |
| Refrigerant / load: |
R-22 / 18.3 oz. |
| Noise Level (dba): |
54 |
|
|
|
|
 |
- Built-In Water Tank Allows For Usage Anywhere.
- Extended Water Tube For Continuous Drainage.
- Washable Air Filter Collects Dust Particles.
- 2 Fan Speed Settings.
- Dehumidifies / Removes Moisture From Air.
- Fire Resistant PVC Plastic Housing.
- Restart IC - Auto Restarts After a Power Failure)
- Uses A UL Required LCDI Plug.
- Self-Evaporating Technology. (see below)
- Digital Thermostat With Remote.
- Time Setting: 1- 12 Hours. |
|
|
|
|
|
| |
Self-Evaporating Technology
During the cooling process, water is extracted from the air into the unit. Most of this water is recycled and used to cool the cooling coils. This creates improved cooling efficiently without adding energy cost. The moisture is then pushed out with the exhaust air, leaving you a virtually no-drain unit. In extreme humid conditions, if condensation collects faster than the unit can evaporate, the excess water will collect in the built-in tank. When the tank becomes full, compressor will automatically shut-off and unit will indicate that drainage is needed. |
|
|
|
